Call
Info

Fire Hose Ramps

Products 1-5 of 5
Show
Fire Hose Ramps - 2 1/2" Hoses Fire Hose Ramps
Price: $800.00
Item #: FHR12 -
Availability: Factory Direct
    View
    Availability: Factory Direct
    Item #: FHR12 -

      These aluminum fire hose ramps are designed to maintain traffic while protecting up to a 2.5" diameter fire hose. The ramp performs the function of protecting hose, pipe, cable, fuel lines, etc. Specifications: Sold only in multiples of 12 feet: (6 pieces x 2 feet wide) which provides 12 feet of road coverage Position ramps at 30° diagonal across roadway so vehicles cross ramps one wheel at a time Aluminum construction Clip assembly means no tools required Included Clips - 10 to assemble one...

      Fire Hose Ramp Clips
      Price: $73.85
      Item #: FHRCLIP -
      Availability: Factory Direct
        View
        Availability: Factory Direct
        Item #: FHRCLIP -

          Replacement clips for the aluminum fire hose ramps FHR12. Set includes enough clips for 12 feet of the aluminum Fire Hose Ramps. Only compatible with FHR12 Fire Hose Ramps for 2 1/2" and smaller diameter hoses. Clips come in packs of 12. Use 2 clips per 2 foot section for joining up to 6 sections across roadway.

          Dual Channel Hose Ramps - 2 1/2" Hoses
          Price: $103.64
          Item #: FHDCR1 -
          Availability: Factory Direct
            View
            Availability: Factory Direct
            Item #: FHDCR1 -

              The dual 2 1/2" channel hose ramp is specifically designed to protect supply line and/or master stream hoses from interruptions or bulges due to vehicle traffic. Hose ramps can be bridged together with the included connectors and surface mounted to prevent movement during use. The ramp supports vehicles up to 20,000 lbs per axle and requires 4" of clearance. Each ramp spans 12" across the width of the roadway.

              Dual Channel Hose Bridge - 3" Hoses
              Price: $105.45
              Item #: FHB3 -
              Availability: Custom Order
                View
                Availability: Custom Order
                Item #: FHB3 -

                  The heavy duty dual channel encloses stream hoses up to 3" in outside diameter, preventing bulges that are created by heavy traffic running over the lines. The Dual Channel Hose Bridge is 5" high and each side has steps which increase at 1" increments that feature reflective yellow safety strips and glass bead reflectors that provide greater visibility in low light conditions. Works great inside and out at warehouses, construction sites, or on fire calls.

                  Dual Channel Hose Ramp - 4" Hoses
                  Price: $120.00
                  Item #: FHDCR4 -
                  Availability: Factory Direct
                    View
                    Availability: Factory Direct
                    Item #: FHDCR4 -

                      The 2-channel hose ramp is designed to hold hose lines with a 4" outside diameter, allowing vehicles with at least a 5 1/4" clearance to drive over the ramp, reducing the chances of hose bulges. Constructed with industrial strength thermoplastic rubber that supports up to 20,000 lbs per axle. Includes two connectors so ramps can be connected side to side to cover more area. Connectors have pre-drilled holes to permanently mount ramps together.