Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963.

Safety Notes - Not intended for pressure applications - for protection only WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

The Task Force Tips plug is constructed of hardcoat anodized aluminum alloy for corrosion protection. The plug has 1-1/2" male NH threads and a cable lanyard with eye hole.

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963. This is the most common plug size in the US. If your FDC or female swivel inside diameter is approx. 3 inches across, you probably need this plug. Please call or check with...

This is the most common replacement plug in the US. If your FDC or female swivel inside diameter is approx. 3 inches across, you probably need this plug. Please call or check with your local fire department if you have any questions. Safety Notes - Not intended for pressure applications - for protection only WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after...

Aluminum chrome plated 2.5 inch NH / NST plug with chain. This is the most common replacement plug size in the US. If your FDC or female swivel inside diameter is approx. 3 inches across, you probably need this plug. Please call or check with your local fire department if you have any questions.

This is the most common replacement plug in the US. If your FDC or female swivel inside diameter is approx. 3 inches across, you probably need this plug. Please call or check with your local fire department if you have any questions. Safety Notes - Not intended for pressure applications - for protection only WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after...

Rocker lug plug constructed from hardened thermoplastic. Will fit 2 1/2" NH/NST FDC female swivel outlets. Intended to keep debris out only, not for pressure applications. Temperature range from -4 F to 200 F. Removed from FDC with adjustable hydrant wrench. The most common plug and size in the US is 2 1/2" NH / NST. This plug will fit into a female with an inside diameter of approx. 3 inches. This is the most common replacement plug size in the US. If your FDC or female swivel inside diameter...

Pin lug plug constructed from hardened thermoplastic. Will fit 2 1/2" NH/NST FDC female swivel outlets. Intended to keep debris out only, not for pressure applications. Temperature range from -4 F to 200 F. Removed from FDC with adjustable hydrant wrench. The most common plug and size in the US is 2 1/2" NH / NST. This plug will fit into a female with an inside diameter of approx. 3 inches. This is the most common replacement plug size in the US. If your FDC or female swivel inside diameter is...

The Task Force Tips plug is constructed of hardcoat anodized aluminum alloy for corrosion protection. The plug has 2-1/2" male NH threads and a cable lanyard with eye hole. This is the most common plug size in the US. If your FDC or female swivel inside diameter is approx. 3 inches across, you probably need this plug. Please call or check with your local fire department if you have any questions.

Safety Notes - Not intended for pressure applications - for protection only Note - 2.5 inch NPSH is NOT a common thread size/type combination. Please verify your size and thread before ordering. 2.5" NH aka NST is much more common. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963. Note - 3 inch NH / NST is very rare and is often confused with 2.5 inch NH / NST which is very common. If you have a fire department connection (FDC), hose coupling or an...

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963.

Brass plugs are available in pin lug or rocker lugs.Safety Notes - Not intended for pressure applications - for protection onlyWARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963.

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963.

Aluminum plugs are fabricated from seamless extruded 6061-T6 aluminum and hard coat anodized per MIL-A-8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Plugs and components meet the requirements of NFPA 1963.